Press

/Press
Press2019-03-07T15:28:32+00:00

 PRESS

Dropbox and Jobsite Tech Group partner to expand vertical solutions marketed to Architectural, Engineering and Construction (AEC) industry

SAN FRANCISCO, Feb 1, 2019 — Dropbox today announced a partnership with Jobsite Tech Group to develop a strategic focus on one of the largest industries in the world. Working with Jobsite Tech Group, Dropbox plans to increase the number of qualified channel partners that will focus on converting the already massive number of licensed users of Dropbox to Dropbox Business subscribers. This initiative will include the education and training required to develop successful paths to market and developing recurring revenue streams for qualified VARS. The value to both the reseller community and end-users will also expand as new partnerships and integrations are formed to extend the benefits throughout the entire AEC industry.
Learn More

Challenges in Using Big Data Analytics for Transportation Project Delivery

TRB released a series of recordings in February 2019 that analyzes the current digital project delivery methods with the intention of identifying unresolved challenges. The presenters discuss the opportunities that arise from the challenges in using big data analytics for improved project delivery (i.e., design, construction, operation, and maintenance), as well as for developing intelligence that can improve decision support for complex projects to directly add project value. The panelists included several case studies that addressed these challenges, including 5D Integrated Project Controls System, Building Information Modeling (BIM), and deliverables for bridge design.
TRB Webinar

SYNNEX promotes Jobsite TECH program and IoT in Construction as part of Regulated Industries efforts

Jobsite Tech Group is supporting SYNNEX in developing their Jobsite TECH program. The sole purpose of this program is to assist manufacturers and their channel partners to better address the rapid adoption of technology in the construction industry. The emphasis of the program is on the Internet of Things (IoT) and how trends like BIG DATA, Cloud Solutions, AR/VR, Drones, Scanning and much more are impacting the entire Architectural, Engineering and Construction (AEC) industry. Hewlett Packard, SHARP, Fujitsu, YUNEEC, VIMaec and KNAACK are just some of the leading organizations that are working together to address these demands.
Learn More>

McCarthy Building Companies produces perfect prints for more efficient construction

America’s oldest privately held general construction contractor, McCarthy Building Companies, Inc. has a long history of building facilities that drive greater value for its customers. This requires having access to accurate, high-quality plans and drawings onsite and in the office. The company acquired a HP DesignJet T830 Multifunction Printer to ensure it could produce flawless prints quickly and cost-effectively, regardless of location.
Read the Full Story

“Job Site University” Aims to Connect Reprographers to Modern Construction Sites

The future of successful reprographics firms, in many cases at least, involves working closely with design and construction businesses that are increasingly high-tech. A three-day event called Intelligent Jobsite University aims to help repro firms see that future and succeed in it.
Read the Full Story

Gaming as a Design Tool

Latest tech devices simplify the leap from BIM to Virtual Reality. Faster conversion times and higher-quality graphics are enabling VR to make the jump from novelty to necessity in the AEC world.
Read the Full Story

Bluebeam and HP Explore Intelligent Jobsite with AGC Attendees

Jobsite Tech Group is proud to be involved in the solution development efforts between HP and Bluebeam as these industry leaders work together to develop real world solutions specifically designed for construction job sites.
Read the Press Release

Intelligent Jobsite

Three principal catalysts for the rapid evolution of technology adoption throughout the AEC industry are discussed in this article.
Read the Full Story

The Intelligent Jobsite

The A/E/C industry was once considered slow to adopt new technology, but not any longer. If there is a design or construction challenge a technological solution can solve, you can be sure an innovation will be developed and our industry experts will embrace it. This AEC Cafe article provides three principal catalysts for the rapid evolution of technology adoption throughout the A/E/C industry and gives examples of how firms are putting recent technological advancements to use.
Read the Full Story

Intelligent Project Delivery

Not all that long ago, the most advanced technology being deployed on a jobsite was a copy machine and a calculator. We have come a long way from those days and on some of today’s high-tech project sites the technology being routinely deployed would have been considered science fiction in decades past.
Read the Full Story

HP Design Jet T830 MFP is 2016 Hot Product

HP is proud to announce that the new HP Design Jet T830 MFP was featured in Construction Executive magazine’s annual 2016 Hot Products special edition. Jobsite Tech Group has been proud to support HP in bringing this innovative new product to market.
2016- Construction Executive Hot Products

HP Inc. Reinvents Large-Format Printing With the Industry’s Most Compact and Affordable Integrated MFP

Expanded DesignJet Portfolio Simplifies How Architecture, Engineering and Construction Professionals Print, Scan and Copy From the Office to the Construction Site
FULL PRESS RELEASE
Hensel Phelps T830 Case Study
Hensel Phelps Video

Hewlett Packard (HP) and The Associated General Contractors of America (AGC) announce that they are working in partnership

Jobsite Tech Group is pleased to be supporting the exciting new relationship between HP and the AGC. On October 20th at the AGC BIMForum in Orlando, we announced that HP and AGC are working in partnership, through innovative technology and sharing best practices, to enable AGC members to meet the challenges of the Architectural, Engineering and Construction (AEC) industry.
Learn More>

Jobsite Tech Group and Williams Scotsman Sponsor Construction Training and Research Lab

Mississippi State University’s Building Construction Science Program (BCS) is pleased to announce a ribbon cutting ceremony for its new Construction Training and Research Lab (CTRL). Jobsite Tech Group and our partners; Williams Scotsman, Hewlett Packard, EarthCam, KNAACK, Samsung and others are pleased to be involved in this lab that offers the chance to train students and keep up with the direction the construction industry is headed in regards to technology.
Learn More>

Jobsite Tech Group Joins AGC

The Associated General Contractors of America (AGC) is the leading association for the construction industry. AGC represents more than 26,000 firms, including over 6,500 of America’s leading general contractors, and over 9,000 specialty-contracting firms. More than 10,500 service providers and suppliers are also associated with AGC, all through a nationwide network of chapters.
Learn More>

VIMtrek Brings Innovation to New Design Show

VIMtrek will be strutting their stuff as the visualization technology used on the new design show Office SpacesTM airing on Lifetime® Television. VIMtrek has been given the opportunity to showcase how cutting edge technology can be utilized throughout the full design process. With the use of virtual reality goggles (Samsung Gear VR) and VIMtrek, host and interior designer, Kalyn Rothaus, was able to virtually experience a BIM (building information modeling) generated model. This is a new way for designers and clients to experience spaces within the building, collaborate on the design, and visualize any conflicts there may be all before the first brick has been laid.
Learn More>

Jobsite Tech Group Joins ABC

Associated Builders and Contractors (ABC) is a national construction industry trade association representing nearly 21,000 chapter members. Founded on the merit shop philosophy, ABC and its 70 chapters help members develop people, win work and deliver that work safely, ethically, profitably and for the betterment of the communities in which ABC and its members work.
Learn More>

VIMtrek Forms Exclusive Alliance to Distribute Unity Technologies Software to Architectural, Engineering and Construction & Building Product Manufacturing Industries

Atlanta GA – September 17th, 2015 – Market leading AEC specialist VIMtrek Group announced today an exclusive alliance with Unity Technologies. VIMtrek is now the exclusive distributor of the Unity Products for the Architectural, Engineering and Construction (AEC) and Building Product Manufacturing (BPM) Industries
FULL PRESS RELEASE

Paper or Paperless: Hensel Phelps meets the challenges of modern Construction Management

Blending the traditional and the digita. Like most modern organizations, Hensel Phelps establishes policies and processes aimed at streamlining work while ensuring that efficiency and good communication isn’t compromised.
HP_Hensel Phelps_Case Study

Scanners, Touchscreens and Cloud Storage: What Do Smart Projects Look Like?

Read the recent article from Construction Executive magazine sharing both interviews with leading firms and the results of a recent survey of 44 commercial contractors with active U.S. projects valued at $5 million or more reveals the extent to which firms have adopted jobsite technologies.
Read the full article here>

The Other Dimension

Using the VIMTrek platform, a small, interactive BIM model full of metadata can now be downloaded to a smartphone in a matter of minutes. It became easy for any stakeholder to see the information they need to see and offer their input.
Read the full article here>

Turn your designs into Virtual Reality (for FREE)

CMD and VIMtrek have joined forces to convert Revit models into 3D building models.
Learn More>

3D Printing Being Used in Fun Ways

3D printers are not new, but they are taking on new life with everything from major architectural designs to everyday items being printed out daily. So what’s the deal with the future of 3D printing?
Learn More>

Sharp Strategic Technology Alliance Resource

Jobsite Tech Group is pleased to have been included in the Sharp Strategic Technology Alliance Resource (STAR)program. The STAR program is the directory of third-party products and services that complement Sharp’s award-winning professional display products. 
Learn More>

NRI LAUNCHES JOBSITE TECH GROUP

FEBRUARY 17, 2015 – NEW YORK, NY –

NRI, a nationwide leader in digital, print and technology equipment solutions for the AEC industry, today announced the launch of Jobsite Tech Group, LLC. Jobsite Tech Group was formed in response to the NRI clients’ needs for technology expertise and equipment on their construction sites. Jobsite Tech Group is dedicated to the sole purpose of assisting organizations in the AEC industry with the adoption of new technology, processes and solutions, all designed to improve efficiency, collaboration and coordination, and to meet the increasing demands of tech savvy owners and design teams…
FULL PRESS RELEASE

Build With Confidence

Transforming the jobsite trailer article reviews the widespread adoption of BIM and the growing amount of fast track and design/build projects has led to an increasing need for on-site technology that supports highly collaborative processes throughout design and construction.  
Read the full article here>

3D Printing Gets Spotlight During Philly Tech Week

PHILADELPHIA (CBS) — As part of Philly Tech Week, a Center City company wants to help you see yourself in another dimension.  The 3D printing is churning out full-color figurines of anyone who walks in the door. “The idea is that we can take this technology and really make it accessible to anybody that can come in and stand still for a few minutes and get scanned up,” says Alex Rivera, a 3D artist and toy designer at NRI, 10th and Chestnut Streets.
Read the full article here>